jareds2020
Member
Hello All,
I am fairly new to PLC's outside of the class, so apologies for any newbie communications.
I am trying to set up a system that will measure an angle change as well as a distance change, so I will be using two sensors: Inclinometer and Laser Distance Sensor.
I plan on using a Allen Bradley Micrologix 1100 (haven't looked into any others yet).
I would like to display the angle and distance for users, I have noticed the EVD111 from Electronic Displays, but would like to try something else since they seem a little large.
Is an HMI the only solution to display the angle and distance?
Thank you in advanced.
Sensors:
Inclinometer: B1N360V-Q42-CNX2-2H1150 - Turck Single Axis
Laser: Banner LTF12UC2LDQ
I am fairly new to PLC's outside of the class, so apologies for any newbie communications.
I am trying to set up a system that will measure an angle change as well as a distance change, so I will be using two sensors: Inclinometer and Laser Distance Sensor.
I plan on using a Allen Bradley Micrologix 1100 (haven't looked into any others yet).
I would like to display the angle and distance for users, I have noticed the EVD111 from Electronic Displays, but would like to try something else since they seem a little large.
Is an HMI the only solution to display the angle and distance?
Thank you in advanced.
Sensors:
Inclinometer: B1N360V-Q42-CNX2-2H1150 - Turck Single Axis
Laser: Banner LTF12UC2LDQ