Hi all, I am using a Siemens 6ES7 331-7KF02-0AB0 Analogue card.
I have channel 0-1 set up for 0-10V, 2-3 4-20mA and 4-5 0-10V.
The jumper blocks on the back are configured correctly for the channels.
I am using Chan 0 and Chan 2 both for speed inputs from 2 different siemens analogue output cards. The rest of the channels aren't being used.
Both channels are working and the machine is working fine.
The SF led is on and the module information is telling me that channel 3 is under range.
Any ideas for getting rid of the SF led please? even though all is working ok I would still like to see all green!
Many thanks
Kevin
I have channel 0-1 set up for 0-10V, 2-3 4-20mA and 4-5 0-10V.
The jumper blocks on the back are configured correctly for the channels.
I am using Chan 0 and Chan 2 both for speed inputs from 2 different siemens analogue output cards. The rest of the channels aren't being used.
Both channels are working and the machine is working fine.
The SF led is on and the module information is telling me that channel 3 is under range.
Any ideas for getting rid of the SF led please? even though all is working ok I would still like to see all green!
Many thanks
Kevin