GX developer: TO command for an analogue output card...

[Mas01]

Hi,
On line 964...Does anyone know what this TO command is doing? This is for an analogue output card Q68DAIN). R0S11 refers to rack 0 slot 11 on the DIN rail, the location of the AO card.
Thanks

 

[Wasan]

For [TO H0D H2 D324 K1] means to send data to module with Start address H0D by send data from D324 to Analog Output channel 2

TO > TO instructions
H0D > Module No. (Start Address)
H2 > Destination Buffer Data (H2 = Analog Output Channel 2)
D234 > Source Data
K1 > for 1 word

I have highlight H1 to H3 on attached picture

 

[Mas01]

For [TO H0D H2 D324 K1] means to send data to module with Start address H0D by send data from D324 to Analog Output channel 2

TO > TO instructions
H0D > Module No. (Start Address)
H2 > Destination Buffer Data (H2 = Analog Output Channel 2)
D234 > Source Data
K1 > for 1 word

I have highlight H1 to H3 on attached picture

That's very useful.
Thanks for your help!