My work laptop recently failed and I'm about to setup my new one. It will have RSLogix 500, Studio 5000, programs for - automation direct hardware, Keyence, ABB, Mitsubishi, and others. As well as other typical programs we may need like AutoCAD, AutoCAD electrical, etc..
My question is how do I set up factory talk activations where it will work with virtual machines. Do I install it on the host or can it be on the VM?
I have some experience with VMWare but not for work. We have normally just installed everything together but I'm gonna keep things separate and take snapshots this time.
Any tips that you have learned along the way would be greatly appreciated. Thank you
My question is how do I set up factory talk activations where it will work with virtual machines. Do I install it on the host or can it be on the VM?
I have some experience with VMWare but not for work. We have normally just installed everything together but I'm gonna keep things separate and take snapshots this time.
Any tips that you have learned along the way would be greatly appreciated. Thank you