Trying to use the APPICOM OPC server that comes with Bradcommunications APPLICOM Card for wornderware.
When I "browse" the OPC tags I get Group and then group has tags such as
I was expecting to see a list of the OPC Tags from the Scada similar to the Export list you can find when you use FSGateway. If I select all the branches, I seem to load up the Network to the PLC as it seems to be reading everything from the PLC and not buffering from the server. .... Any Clues?
When I "browse" the OPC tags I get Group and then group has tags such as
Code:
EBPLC\
|-A*.*
|-A*.*_*
|-AB*
|-AW*
|-DB*
|-DB*.DDB*
..
\-EB*.*
HPUPLC\
|-A*.*
|-B*.*
|-DB*.*
..
\P*.*_P
I was expecting to see a list of the OPC Tags from the Scada similar to the Export list you can find when you use FSGateway. If I select all the branches, I seem to load up the Network to the PLC as it seems to be reading everything from the PLC and not buffering from the server. .... Any Clues?