Tim Ganz
Member
I have a VFD driven motor of 125 HP that has a separate conduit run for the T-Leads but they go into the PLC thus they are 24 VDC an OEM design not mine.
I was thinking that these shielded 2 conductor cable for the T-Lead back to the control cabinet and into the PLC may be enough but it's on the same 24 VDC supply as all the other PLC I/O.
I can maybe add an interposing relay but I prefer not to if it's not necessary as they is not much free cabinet space at all from the OEM.
I was thinking that these shielded 2 conductor cable for the T-Lead back to the control cabinet and into the PLC may be enough but it's on the same 24 VDC supply as all the other PLC I/O.
I can maybe add an interposing relay but I prefer not to if it's not necessary as they is not much free cabinet space at all from the OEM.