MATT116
Member
I have a old machine with a Texas Microsystems 1448 industrial computer and its running MS-DOS6. When ever I try to run the attached program T2CONF I get a message "there is a error in the program". When I open the program in DOS Edit,Notepad++,Word...etc all I see are the ASCII symbols and it appears to be ASCII extended. How would I go about trying to get this into a human readable format so I can try to find the error.
O-ya the machine is a T-Drill T200 manufactured in Finland in 1992. I have tried talking to the OEM but there are no help they just claim the machine we have was a prototype and that they don't have much info on it.
Thanks
Matt
O-ya the machine is a T-Drill T200 manufactured in Finland in 1992. I have tried talking to the OEM but there are no help they just claim the machine we have was a prototype and that they don't have much info on it.
Thanks
Matt