jjones0377
Member
Hey all! Long time reader, first time poster!
I have an EA9-T7CL and an MicroLogix 1200 connected via DF1.
I'm all good and got everything mostly up and running. Program is 99% complete, and the HMI programming probably 95% done. I have 1 last function I'm wanting to incorporate, and thats pull in the PLC timers onto the HMI. How do i do this?
I've tried just pulling the T4:36.ACC value in. I've tried putting the T4:36.ACC value into an integer, N7:1. Which is working on the PLC side. I am trying to put it into a dynamic text field with a trigger tag of the same bit being >0, then display the text. So as follows.
T4:36.ACC >0, then display the timer's ACC value on the HMI.
I cannot, for the life of me, figure this out. I am self taught with all of your guys' help and youtube! This is my first PLC program and first HMI to add on to that. Just trying to get this bad boy working! Any help is greatly appreciated!
I have an EA9-T7CL and an MicroLogix 1200 connected via DF1.
I'm all good and got everything mostly up and running. Program is 99% complete, and the HMI programming probably 95% done. I have 1 last function I'm wanting to incorporate, and thats pull in the PLC timers onto the HMI. How do i do this?
I've tried just pulling the T4:36.ACC value in. I've tried putting the T4:36.ACC value into an integer, N7:1. Which is working on the PLC side. I am trying to put it into a dynamic text field with a trigger tag of the same bit being >0, then display the text. So as follows.
T4:36.ACC >0, then display the timer's ACC value on the HMI.
I cannot, for the life of me, figure this out. I am self taught with all of your guys' help and youtube! This is my first PLC program and first HMI to add on to that. Just trying to get this bad boy working! Any help is greatly appreciated!