ayuda con interfase 1747 uic

gonzal20

Member
Join Date
Jun 2022
Location
mexico
Posts
1
se me desprendieron los cables del cable usb quiero soldarlos pero no se como van los cables si alquien me pudiera proporcionar una foto o como van soldados se los agradeceria mucho :sí:
 
se me desprendieron los cables del cable usb quiero soldarlos pero no se como van los cables si alquien me pudiera proporcionar una foto o como van soldados se los agradeceria mucho :sí:

Translated:

The cables of the USB cable came off, I want to solder them but I don't know how the cables work. If someone could provide me with a photo or how they are soldered, I would greatly appreciate it: yes:

Which end of the cable came off?

https://www.youtube.com/watch?v=DlTenly-SCQ
 
Last edited:

Similar Topics

Hello I have a problem of axis with a sinamic drive, i have the starter installed and the fail is because i have a failure over the voltage in...
Replies
0
Views
1,429
Hello All, I am stumped on how to convert a %MW to a %MF using Machine Expert Basic and a Modicon M221. The help files show a word to a double...
Replies
4
Views
139
A lifetime ago I built a couple systems with Modicon Micro84 controllers that are still running. But today one of those died and they reached out...
Replies
2
Views
87
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
87
Hello All, Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
Replies
6
Views
314
Back
Top Bottom