Hi
I wanted to know anyone try to convert the Yamatake SDC40A into Azbil SDC46A. As the SDC40 model is already absolute, the replacement is SDC46A but there to many parameter for the SDC46A model which i found difficult to be set,
as i do not have the manual for setting SDC40
from the document i find, the SDC40 using
Para SDC40 SDC46A
SP:43 SP:unable to set
Dev:-12
EV1:40 EV1:40
EV2:45 Ev2:45
EV3:47 EV3:47
Wiring
Output Event 1: X6 Output 1: X6
Output Event 2: X7 Output 2 :X7
Output Event 3: N.C
Output MV1 :+A155 Output 3: +A155
-A155 -A156
Input RSW1 : 150 DI: 150
151(C) 151(C)
RTD input RTD input
Do anyone know how to configure the SDC46A?? or have the manual for SDC40??
Thank you!
Regards
sttchui
I wanted to know anyone try to convert the Yamatake SDC40A into Azbil SDC46A. As the SDC40 model is already absolute, the replacement is SDC46A but there to many parameter for the SDC46A model which i found difficult to be set,
as i do not have the manual for setting SDC40
from the document i find, the SDC40 using
Para SDC40 SDC46A
SP:43 SP:unable to set
Dev:-12
EV1:40 EV1:40
EV2:45 Ev2:45
EV3:47 EV3:47
Wiring
Output Event 1: X6 Output 1: X6
Output Event 2: X7 Output 2 :X7
Output Event 3: N.C
Output MV1 :+A155 Output 3: +A155
-A155 -A156
Input RSW1 : 150 DI: 150
151(C) 151(C)
RTD input RTD input
Do anyone know how to configure the SDC46A?? or have the manual for SDC40??
Thank you!
Regards
sttchui
