b&r cold restart
- Thread starter mixed
- Start date
Bit_Bucket_07
Member
When I Googled it, I found this on Page 52 of this document.
FIX−RAM
Using B&R Automation Studio™ (software configuration), you can
configure a part of User RAM to behave like User ROM during a
COLD RESTART. This memory area is called FIX RAM.
Objects stored in FIX RAM are not deleted during a COLD RESTART.
COLD RESTART boot mode corresponds to the first time a processor
is initialized. The operating system is restarted and all RAM data
(except objects stored in FIX RAM) is deleted.
FIX−RAM
Using B&R Automation Studio™ (software configuration), you can
configure a part of User RAM to behave like User ROM during a
COLD RESTART. This memory area is called FIX RAM.
Objects stored in FIX RAM are not deleted during a COLD RESTART.
COLD RESTART boot mode corresponds to the first time a processor
is initialized. The operating system is restarted and all RAM data
(except objects stored in FIX RAM) is deleted.
Similar Topics
I am working on a project that have Q12PRHCPU (redundant Mitsubishi PLC). I have the application program, PX developer and also GX developer but...
Hello Guys,
I am facing a problem on automatic warm restart of CPU 315-2DP in case of Profibus Communication failure (during power...
I am still having a problem with a S5 plc requiring a cold start. I have a PG 675 with some connecting leads and without being rude, I don't know...
Greetings all,
I have a general problem when using instance DBs with FBs in S7.
Upon a cold restart, the values in the instance DBs gets reset...
Hi all,
Looking for a temperature sensing solution for determining ambient temperature in the frigid Canadian winters. Discrete outputs are fine...