Bad data count on Panelview

Deer

Member
Deer
Join Date
Jun 2002
Posts
124
Gentleman,

Does anyone know, what cause an error message " bad data count" on Panelview550 always appear when perform upload program from terminal to the computer (through 1747-PIC), so that we never get and open this program!
Any advice from you would be appreciated.
Thanks experts!

Best regards,

Deer
 
Seppoalanen,

Thanks for your reply, but basically my panelbuilder version (3.7.00) is newer than the panelview terminal.
Is it cause by using the 1747-PIC to upload program from Panelview so that process upload not perfect?


Regards,

Deer
 

Similar Topics

J
Panelview 600 bad data count
Greetings. We have two panelview 600s that we are trying to backup the old panelview programs before installing updates via flashcards. I can get...
Replies
4
Views
6,671
jaydee
J
B
Ideas on how to deal with bad data
Hi everyone, PLC: Micrologix 1400 I have a application that is looking at 2 different flow meters and comparing there totalizer for leak...
Replies
4
Views
1,668
cardosocea
C
I
Citect HMI - Bad raw data type
I am using Citect HMI and a WAGO PLC (750-842) communicating using MODNET (MODBUS over TCP/IP) and have the following problem: I can successfully...
Replies
2
Views
8,582
IainH
I
Kyle Grathwol
AB MicroLogix N7 register storing bad data
Good Evening Gentlemen, This was a first for me but maybe you guys have experienced this. Allen Bradley MicroLogix 1200 1762 Series...
Replies
8
Views
5,596
Kyle Grathwol
Kyle Grathwol
T
Is it bad to have multiple identical inputs on an HMI?
Hello all, I know its not good practice to have duplicate destructive bits when writing plc code, but I'm wondering about writing to the same tag...
Replies
2
Views
109
TheRooster
T
Back
Top Bottom