shahmirous
Member
Hi guys '
Can anyone help with the problem of configuring an analog input module (1746 NI8) using block transfers (BTW) .
I have a SLC 5/05 CPU and a 1747-SN(Scanner) this system is connected to a 1747ASB module which has a 1746 NI8 as a RIO module.
as far as i know i can configure the 1746 NI8 by copying into outut words (O:1.0 to O:1.7) because the scanner is on slot 1 i use O:1.X.
But is there any way to configure the module using BTW??? i have a sample program that it seems it is working like this but i can't figure out any ruls it is just transfering a block of configuration (lets say N10:0) to the same address (Group 0,rack 0,Slot 0) of the analog input module??? can this realy be done? don't we need to let the module know in any way that this is the cofiguration word???
Can anyone help with the problem of configuring an analog input module (1746 NI8) using block transfers (BTW) .
I have a SLC 5/05 CPU and a 1747-SN(Scanner) this system is connected to a 1747ASB module which has a 1746 NI8 as a RIO module.
as far as i know i can configure the 1746 NI8 by copying into outut words (O:1.0 to O:1.7) because the scanner is on slot 1 i use O:1.X.
But is there any way to configure the module using BTW??? i have a sample program that it seems it is working like this but i can't figure out any ruls it is just transfering a block of configuration (lets say N10:0) to the same address (Group 0,rack 0,Slot 0) of the analog input module??? can this realy be done? don't we need to let the module know in any way that this is the cofiguration word???