ceilingwalker
Lifetime Supporting Member
OP
Thanks guys for all the input. I will let you know what it turns out to be.
Block transfer problems with PLC5/40
- Thread starter ceilingwalker
- Start date
ceilingwalker
Lifetime Supporting Member
OP
Ok, after playing with all of the jumpers and doing some troubleshooting the mfc's are working. However, the numbers are all off. This is probably going to be a scaling issue. I'm not sure how to set the scaling. The PLC-5 is sending it's output (SV) and receiving its input (PV) using 0-5VDC.
Similar Topics
I have a 1771-OFE analog output card that is controlling a VFD and a modulating gas valve on an AMU. The OFE-2 is in a remote rack that uses a...
so after a previous thread about the panelview 1200. I figured everything out that I needed to get working with it.
I've got the RIO discrete...
Good Evening ,
I need to convert a PLC 2/17 ( RS Logix 5 ) over to a CompactLogix 1769-L33ER . I took notice in the RS Logix 5 program that...
Hello all, I couldn't find a solution through the search tool so hopefully someone out there can help me along.
I'm working with a converted...
Hello, I am currently converting a project from PLC5 to ControlLogix. I have migrated the program from Logix5 to Logix5000 and any Block Transfer...