BMXAMM0600 Analog Module

[rashmorbius]

I am trying to simulate either a 0-10VDC circuit or 4-20mA circuit into a Telemecanique BMXAMM0600 analog card (M340 platform). Is there an EASY way to do this? It needs to be adjustable.

 

[robertkjonesjr]

Try Fluke. They make process meters that will source 4-20mA current and I use these all the time to validate scaling and other things on analog channels.

 

[504bloke]

I am trying to simulate either a 0-10VDC circuit or 4-20mA circuit into a Telemecanique BMXAMM0600 analog card (M340 platform). Is there an EASY way to do this? It needs to be adjustable.

1.5Volt batteries

1.5
1.5+1.5
1.5+1.5+1.5
1.5+1.5+1.5+1.5 etc

 

[rashmorbius]

Thanks for the replies, but I am trying to do this as "cheap" as possible. Is there a way I could use a potentiometer to accomplish this?

 

[chud]

Is this too check software or the analogue channels themselves? Cant go much cheaper than the batteries for checking the channels. If for software just force the values in the plc