Button in vijeo citect

[franciscoufa]

Hello,

When I added a button in the Graphic Editor, it has got a locking type.
I explained: In the input button's comands, I put this "lamp=1", then, when I push the button, the lamp is set("1) and when I pull it, the lamp stay in set too!
I want that when I push the button, the lamp is reset ("0")

Thank, and I'm sorry for my bad English!

 

[Frosty]

Hey,

see page 585 of:http://www.scada.ru/userfiles/Manuals/CitectSCADA%207.20%20User%20Guide.pdf


basically you need to assign a down action and an up action.