Cable required for Communication with TSX Micro PLC

shivam

Member
S
Join Date
Oct 2010
Location
Mumbai
Posts
4
Hi all,

I am working on a project for which I have to establish communication between Modicon TSX Micro PLC and PC using UNI-TELWAY protocol.

In my project the distance between PLC and PC is approx 45 meters.

I want to know the name of the communication cable and what is the maximum distance supported by this cable ?

I would be grateful if anyone can provide me with the information required.

Thanks and regards
shivam
 

Similar Topics

S
OT: When is VFD cable recommended/required?
It sounds obvious, I know. The cost of good VFD cable for many motors over a modest distance is quite pricey. The manuals say to always use a...
2
Replies
16
Views
5,588
seth350
S
H
siemens CP5711 CABLE details required.
Hi,Dear friends.i have SIEMENS CP5711 adapter.One side of this adapter is 9 pin female connector. can you please guide me about the cable details...
Replies
0
Views
1,843
hinddhindsa
H
H
Usb to mpi cable driver required
Hi, dear friends . i have an USB-MPI cable for the programming of s7-300 PLC. i need to install the driver for this. do you know any link to...
Replies
4
Views
1,906
hinddhindsa
H
F
liyan plc ex1n programming cable required?
hi all, i have a liyan plc of ex1n series i need a liyan plc to pc programming cable wiring diagram? have an idea of wiring diagram then pls...
Replies
4
Views
4,413
farhan.yousuf
F
S
config of data cable Siemens S-5 required
hi, is there anybody who can tell me the pin configurations for the cable which i want to use programming Siemens PLC S-5... i just want to...
Replies
1
Views
3,561
PLucas
PLucas
Back
Top Bottom