config of data cable Siemens S-5 required

sekhar203

Member
S
Join Date
Apr 2007
Location
Bhilai
Posts
13
hi,
is there anybody who can tell me the pin configurations for the cable which i want to use programming Siemens PLC S-5... i just want to make that interfacing cable by myself through your asssistance...

kind rgds
shekhar
 

Similar Topics

P
AB analog module 1769-IF16C | Generic Extra Data Config
Do anyone knows what type of data we need to enter for this AB analog module 1769-IF16C on the tab called -Generic Extra Data Config-
Replies
13
Views
7,998
ajatnika
A
L
FactoryTalk Linx Ethernet config error
Hello everyone I have the next issue with FactoryTalk Linx, when i configure the Ethernet driver and try to find the IP Address of the PLC Device...
Replies
0
Views
67
Lawrence Alcocer
L
L
Prosoft MVI69E-MBTCP - Config help
Hi, We have an application that has a device that goes through a reboot (appears un-graceful) What then happens is the MVI module appears to hang...
Replies
0
Views
98
lostcontrol
L
P
Siemens Scalance SC636-2C NAT config
Hi all, I have some difficulties with programming a NAT config in my Scalance SC636-2C When programming the NAT-table i'm not able to reach my...
Replies
4
Views
250
goghie
G
A
MOMENTUM HIGH SPEED COUNTER WIRING AND SOFTWARE CONFIG
Hello Folks, Has anyone configured a Momentum high speed counter on Unity 13.1. We need the wiring diagram for Momentum High speed counter and...
Replies
0
Views
98
autodepart
A
Back
Top Bottom