KingPresident
Member
Not looking for a how to, just wondering if anyone here has successfully made these work with each other.
Can a PanelView Plus be used with a Phoenix Contact ILC?
- Thread starter KingPresident
- Start date
KingPresident
Member
OP
Just asking again.
Operaghost
Member
Nothing from Phoenix Contact is listed as being supported. RA lists what looks like a generic OPC DA driver. Maybe that can be made to work. But I have not attempted to make this connection.
OG
OG
Similar Topics
In FactoryTalkView, is there a function or tool that generates a list of all objects used in a project and their corresponding PLC tags? Thank you.
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Hi Everyone,
Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Hello All!
Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Hello everyone. This is more of an HMI issue. I have a new PanelView Plus 7 Series B. I am using the alarm list object to display the fault...