belae1ka
Member
Hi all,
For my senior design project I am controlling a large three phase motor from the program Labview through MODBUS.
The sensors being used in the control system of my project are a TMP36 temperature sensor, a S-type load cell, and a rotary encoder to measure RPM.
Instead of using a USB Data Acquisition device (DAQ), I would like to know if it is possible to wire my sensors to the VFD and have MODBUS read the sensor values.
Also, Instead of using a rotary encoder to measure RPM can I read in the RPM of the motor using the VFD?
The VFD I plan on using is the DURApulse GS3 series AC drive (1 HP, 230V AC)
Model name: GS3-21P0
Load cell: https://www.amazon.com/Keli-Electri...coding=UTF8&psc=1&refRID=4A2W5VXCYSXYYG0WWN0H
Temp sensor: http://www.analog.com/media/en/technical-documentation/data-sheets/TMP35_36_37.pdf
Thank you.
For my senior design project I am controlling a large three phase motor from the program Labview through MODBUS.
The sensors being used in the control system of my project are a TMP36 temperature sensor, a S-type load cell, and a rotary encoder to measure RPM.
Instead of using a USB Data Acquisition device (DAQ), I would like to know if it is possible to wire my sensors to the VFD and have MODBUS read the sensor values.
Also, Instead of using a rotary encoder to measure RPM can I read in the RPM of the motor using the VFD?
The VFD I plan on using is the DURApulse GS3 series AC drive (1 HP, 230V AC)
Model name: GS3-21P0
Load cell: https://www.amazon.com/Keli-Electri...coding=UTF8&psc=1&refRID=4A2W5VXCYSXYYG0WWN0H
Temp sensor: http://www.analog.com/media/en/technical-documentation/data-sheets/TMP35_36_37.pdf
Thank you.