canopen communication error in codesys with TTC-90

amin.sci

Member
A
Join Date
Mar 2015
Location
arak
Posts
2
Hi
1-I have a HY-TTC90 ecu.I can connect to it with TTDownloader and peak-usb but when I want to connect to it with codesys ,the following error shows:
(((Communication error(#0):logout performed)))

2-when I download the hex file with TTDownloader that generated with codesys,downloaded but doesn't work.
:confused:
Please help me
thanks
 

Similar Topics

S
AB Micro850 CANOpen Communication
Hi, I have a AB Micro850 that needs to write and read on a CANOpen network with a Danfoss Display and Schneider Motor Drive 110kW, I'm using...
Replies
1
Views
372
Ken Roach
Ken Roach
S
Communication S7 1500 and CanOpen
let me explain it. I have successfully sent DO and DI, but I still don't know how I know that the CanOpen is run or there is a problem. for...
Replies
0
Views
1,079
syakir
S
K
Problem with CANOpen in Weintek-Lenze communication
Hello everyone, I have Weintek HMI and three Lenze power inverters which should communicate with HMI via CANOpen. I have no problem with PDOs...
Replies
1
Views
4,028
krewak
K
V
schneider Modicon premium tsx 571634 PLC with Canopen Communication
Dear All, Good Morning. I am trying to connect STB NCO2212 with TSX P571634 PLC via Canopen Communication. But i am unable to configure the...
Replies
0
Views
3,584
vikas.vvs
V
C
Communication Codesys V2.3 and V3 usin CANopen
Hey guys, I used to have a PLC and a HMI from ifm. I programmed both of them in v2.3 and used network variables over CAN. We switched to...
Replies
6
Views
6,636
AMarks95
A
Back
Top Bottom