can't connect to PCI2000ETH

[gzzjq1982]

when configure the network, test the communication, the message is 33 time out
how to fix the problem
thank you

 

[Jeebs]

Have you:

- Activated the correct protocols?
- Correctly configured the PCI2000ETH card?
- Correctly configured the connecting partner's ethernet card?
- Correctly configured the subnet mask?
- Initialized the board?
- Created topic for the card to read?

Can you ping both the PCI2000ETH and the connecting partner when connecting a PC to the network?


For future posts/thread, please state the manufacturer of the device.
I'm guessing it's a BradComm Applicom card.

 

[gzzjq1982]

first thank you
before I used IP address can't connect the PLC
and I Last try to use ISO ,and it can connect to PLC
i don't the reason why can't use the IP