ganutenator
Lifetime Supporting Member
It is not critical. But would be nice to add a stepper motor to the hp rinse arch on the car wash to change the rinse angle based off of the height of the vehicle.
So far, haven't been able to find anything that can hold up to the chemicals.
The voltage is 208VAC, and the horse power I forget off the top of my head, but we are currently using the smallest atv312 1/4hp drive at a fixed rinse angle.
So far, haven't been able to find anything that can hold up to the chemicals.
The voltage is 208VAC, and the horse power I forget off the top of my head, but we are currently using the smallest atv312 1/4hp drive at a fixed rinse angle.
Last edited: