PLCs_are_fun
Member
I apologize for the basic question but I have read the documentation and searched online and I'm still not getting it...
I want to convert UINT to DINT in CCW. I am able to do this using 16MOV instructions to map the individual bits, but I would like to do it with 1 COP instruction.
Src: my_UINT.0
Dest: my_DINT.0
Length: 16
gives a build error "too few parameters used"
Src: my_UINT
Dest: my_DINT
Length: 1
compiles but gives status code 0x06 "source data size is too small for copy"
Could someone please point me in the right direction?
I want to convert UINT to DINT in CCW. I am able to do this using 16MOV instructions to map the individual bits, but I would like to do it with 1 COP instruction.
Src: my_UINT.0
Dest: my_DINT.0
Length: 16
gives a build error "too few parameters used"
Src: my_UINT
Dest: my_DINT
Length: 1
compiles but gives status code 0x06 "source data size is too small for copy"
Could someone please point me in the right direction?