Citect Modbus time interval reading

Dont get shirty, i tried to help you, you won't listen.

You will never learn unless you listen to people who have experience or advice to give, so here it is again.

You are going about this project the wrong way, stop, re-evaluate, and re do it properly.
 

Similar Topics

Hi every one. I have strange problem with Modbus communication in Citect 2018. I am communicating to the site switches through Modbus TCP protocol...
Replies
0
Views
1,080
Hi Guys, I currently have a customer that has their Citect 6.10 SCADA system running on two WindowsXP SP2 PC's. They are connected to 10 remote...
Replies
2
Views
2,040
I was using EM6400 energy meters with Vijeo Citect scada in Modbus RTU network & mapping as following successfully. NAME- KW_SMS_1 TYPE- REAL...
Replies
2
Views
2,485
Hi there, Firstly I no nothing about Quantum PLCs and very little about Citect. I have an old Win NT Citect SCADA system failure which I need to...
Replies
8
Views
2,940
Hi everyone, I'm an engineering fourth grade student and I am to new these topics. I need to communicate between Citect SCADA 2016 and M241 plc...
Replies
2
Views
3,102
Back
Top Bottom