Anyone can help me! I used CitectSCADA7.2 to communicate Modbus Serial direct COM port. I set up everything true: Boards, Ports, I/O Devices and tag. I also tested it by ModScan OK but it does't work in CitectSCADA, the tag always show "Bad".
CitectSCADA7.2 Modbus problem
- Thread starter pvhimsat
- Start date
Similar Topics
Hi guys
Ive found this site extremely helpful for logix5000 but i have an issue (hope it can be answered) with citectSCADA7.4. This is my first...
Hello Everyone,
I am using a raC_Opr_NetModbusTCPClient AOI module, as below,.
So, I need some assistance to restrict in reducing the poling...
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows
plc...
Hi folks,
I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Hi,
I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why?
Could...