mike4766
Member
Hi all
I am trying write a program that has analog input from a pressure sensor in a tank that read the pressure sensor for level when the pump start filling up the tank the motor for gate valve is closed when the water reach the high level the motor for the gate valve will open so the input and the output is:
input X1 : from limit switch 1 to turn off the motor when its opening the valve
input X2 : from limit switch 2 to turn off the motor when its closing the valve
input AD1V : analog input from pressure sensor .
i need to accumulate data from pressure sensor and do some calculations using data to calculate the current level of the tank .is it possible to do it with a plc??
I have a in a Click co-02dd2-d plc..
thank you
I am trying write a program that has analog input from a pressure sensor in a tank that read the pressure sensor for level when the pump start filling up the tank the motor for gate valve is closed when the water reach the high level the motor for the gate valve will open so the input and the output is:
input X1 : from limit switch 1 to turn off the motor when its opening the valve
input X2 : from limit switch 2 to turn off the motor when its closing the valve
input AD1V : analog input from pressure sensor .
i need to accumulate data from pressure sensor and do some calculations using data to calculate the current level of the tank .is it possible to do it with a plc??
I have a in a Click co-02dd2-d plc..
thank you
Last edited: