dploof23
Member
Does anybody know if the cable between a click PLC and a Cmore micro HMI is a standard phone cable?
Thank you,
Dave
Thank you,
Dave
Click PLC to Cmore micro cable
- Thread starter dploof23
- Start date
bernie_carlton
Lifetime Supporting Member + Moderator
It appears to be a crossover. The manual has a diagram.
Similar Topics
I have a project i;m stumped on. I have a routine on a Click PLC that is sort of a decoder. It looks to see if wires are installed in a connector...
We need to have a way to update programs in the Cmore ea1-s3ml panel through the COM port when plugged into the Click PLC com ports . Is there a...
Complete noob here, using a Click C0-02DD1-D to run a test stand. Requirement is to turn on motor run for X seconds, turn off and dwell for X...
merry christmas and happy new year
i have a click c0-00dr-d and allen bradley 2711c-t3m. can the panelview talk to the click plc via modbus...
Hi guys, i have never had to do a PWM Output or input before
i have a Device that to dimm the lamp output from the ballast, the ballast has a 24V...