I sometimes struggle with whether the tag specs need the array index or not, and whether the length is 1 or the number of elements of the array. You'd think you'd be able to read a tag to a tag, without having to specify start and length for arrays, but I believe you need the [0] specifications, and length = number of elements of the array. - I'll check tomorrow and post back unless someone else can confirm..
You usually get the "IOI Syntax Error" when the remote tag doesn't exist, or is configured incorrectly (You wouldn't be able to Verify the project if there was a problem with the local tag).
Check you have the correct structure, DINT[8], in the Flex you are reading, and that it is Controller-Scoped !
I can't believe you might have created MyDINTArray as Program-Scoped after the preceding events, but could be worth a double-check just to make sure ?.
You usually get the "IOI Syntax Error" when the remote tag doesn't exist, or is configured incorrectly (You wouldn't be able to Verify the project if there was a problem with the local tag).
Check you have the correct structure, DINT[8], in the Flex you are reading, and that it is Controller-Scoped !
I can't believe you might have created MyDINTArray as Program-Scoped after the preceding events, but could be worth a double-check just to make sure ?.
I remember seeing a guy on television years ago who could tell you the piece of (classical) music that was on an LP, with the label taken off !! He claimed he was reading the grooves, picking up on tempo, loudness, spacing etc., but he might have had a shot at the stamping of the catalogue number ????That's like the guy who scanned a 45 record, loaded the image onto his computer.....