Codesys 3.5 SP17P2 Simulation mode Modbus TCP
- Thread starter leon78
- Start date
ndzied1
Lifetime Supporting Member
I have done this. You can't do it strictly in simulation mode.
You have to use the run time that comes with CoDeSys. it is a time limited version. It lets you use your PC as a soft PLC for 2 hours (I think that's the time limit).
But this means that you have to change your target in your project to the one you will run on your PC. I usually use V3 Win 32 or something. I'm not on my laptop with CoDeSys right now. Before loading on your actual hardware you will have to change the target back.
It also works with Ethernet/IP
You have to use the run time that comes with CoDeSys. it is a time limited version. It lets you use your PC as a soft PLC for 2 hours (I think that's the time limit).
But this means that you have to change your target in your project to the one you will run on your PC. I usually use V3 Win 32 or something. I'm not on my laptop with CoDeSys right now. Before loading on your actual hardware you will have to change the target back.
It also works with Ethernet/IP
Similar Topics
Hello to all,
I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Hello,
I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2.
I test the...
Hello,
I have a requirement to manage the text alignment dynamically.
So, for example:
1. English Texts should be displayed from Left in...
Hello,
I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
Hi everyone,
as this is my first experience with Rockwell Software i would like to know what's the best way to make Enumerations?