Codesys - Convert byte to outputs

yes that can be done, only when all bits are in sequence, so from 0 to 7, and the other problem is you will have to use WORD due to the organisation of the I/O.
 

Similar Topics

I
Codesys convert word to bytes
Hello, I am new to Codesys 3.5 and I am trying to figure out how to convert a word into 2 bytes to send to another plc via ethernet/ip. Could...
Replies
5
Views
5,101
drbitboy
drbitboy
J
Codesys convert TIME to INT
Hi, It's been a while since I've been doing PLC work as I've been concentrating on a large security project. However I have a TIME variable in a...
Replies
11
Views
16,285
satnam_singh
S
H
Webvisu not showing Codesys V3.5 SP13 Patch 2
Hello, I am using a Hitachi Micro EHV+ for a small project, and I wanted to have a Web visu, done with Codesys V3.5 SP13 Patch 2. I test the...
Replies
6
Views
303
Zensequitur
Zensequitur
I
Dynamic Text Alignment in Codesys
Hello, I have a requirement to manage the text alignment dynamically. So, for example: 1. English Texts should be displayed from Left in...
Replies
0
Views
93
Indusha M
I
J
Codesys/Modbus/IFM CR1074 display questions
Hello, I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
Replies
1
Views
163
durallymax
D
Back
Top Bottom