JonM_AST
Member
Hello,
I'm struggling with intermittent comm loss on two ABB ACS800 Drives, it definitely seems to be affecting one drive more than the other but still both.
RSNetworx for ControlNet is not providing much help.
I've wrote automatic reset logic for the drives to help mitigate the issue.
It seems to happen sporadically every couple of months and the best information I've gotten from the manuals is to power down the drive to reinitialize the the module.
Once we have some sheduled downtime I plan on checking the connections and verifying the end of line resistor.
I would appreciate any help or comments.
I'm struggling with intermittent comm loss on two ABB ACS800 Drives, it definitely seems to be affecting one drive more than the other but still both.
RSNetworx for ControlNet is not providing much help.
I've wrote automatic reset logic for the drives to help mitigate the issue.
It seems to happen sporadically every couple of months and the best information I've gotten from the manuals is to power down the drive to reinitialize the the module.
Once we have some sheduled downtime I plan on checking the connections and verifying the end of line resistor.
I would appreciate any help or comments.