Hi,
I bought a brand new panelview 600 2711-B6C9 but it refuses to go online with the laptop.The cable i use is the 2711-NC13.I checked the port config on the laptop and the baudrate is the normal 19200.The panelview is the same.In rslinx i'm using the AB_DF1-1 driver and that should work.but it doesn't.Can anyone give me some hint please.I programmed a panelview earlier and that wasn't a problem.When I choose the PIC/AIC drives the computer comes with the message that it failed to initalise the drives.I can't use that one.I unistalled the com 1 port and re-installed it but with no result.Thanx for your time.
grtz Simon
I bought a brand new panelview 600 2711-B6C9 but it refuses to go online with the laptop.The cable i use is the 2711-NC13.I checked the port config on the laptop and the baudrate is the normal 19200.The panelview is the same.In rslinx i'm using the AB_DF1-1 driver and that should work.but it doesn't.Can anyone give me some hint please.I programmed a panelview earlier and that wasn't a problem.When I choose the PIC/AIC drives the computer comes with the message that it failed to initalise the drives.I can't use that one.I unistalled the com 1 port and re-installed it but with no result.Thanx for your time.
grtz Simon