communication b/w bristol control wave plc and ifix using opc

rahulmm7

Member
Join Date
Jul 2014
Location
India
Posts
21
Hi all

Can any one tell me on how to communicate bristol control wave plc to ifix using opc drivers in ifix...pls...its in critical stage..

thanks in advance
 
I'm currently working on migrating our ifix/bristol system to OPC using the Kepware Server. It's the only driver I have researched / tested which seems to work well with ifix....

Still in the testing phase though
 

Similar Topics

I have a Bristol Babcock (BB) 3330 CPU with a BB Communication Board. Port A on the communication board is set up as a custom port for modbus...
Replies
0
Views
7,126
Hi all, I have a studio 5000 project that incorporates a Rexroth Indradrive Cs servo amplifier, a Kistler Joiner, with a maXYmos measuring/control...
Replies
1
Views
30
I am working with a remote rack with a 1771-ASB adapter, and inside Logix 5000 I am trying to find where it displays the status of each of the...
Replies
8
Views
116
We had a site where a rat gnawed through some fiber optic cables which (obviously) prevented communication to a remote rack entirely. We, and the...
Replies
3
Views
110
I have a slc500 plc 1747-L30A. Using a communication cable 1747-PIC cable box combination. Running a version of software from DOS on a Windows 3.1...
Replies
8
Views
181
Back
Top Bottom