plcplcplc1
Member
Hello guys, I'm new to this forum.
I'm having problems to establish communication between a CompactLogix 1769-L30ER and a Mitsubishi VFD FR-F800 using the communication card A8NEIP 2P.
I followed every step on the A8NEIP 2P manual, but I can't make it work. You can find that manual here: http://omniray.ch.sabon.ch-meta.net...P_Rockwell-Logix-PLC_QuickStartGuide_V1.1.pdf
I added the special program Mitsubishi provides for CompactLogix into my main program. I installed the EDS file and I aslo set all the parameters in the VFD. I already assigned the correct IP in the communication card.
LED's indicators on Network status, Module status and Link 1 are green and blinking which means no connections are established.
Does someone have an idea what am I missing?
I'm having problems to establish communication between a CompactLogix 1769-L30ER and a Mitsubishi VFD FR-F800 using the communication card A8NEIP 2P.
I followed every step on the A8NEIP 2P manual, but I can't make it work. You can find that manual here: http://omniray.ch.sabon.ch-meta.net...P_Rockwell-Logix-PLC_QuickStartGuide_V1.1.pdf
I added the special program Mitsubishi provides for CompactLogix into my main program. I installed the EDS file and I aslo set all the parameters in the VFD. I already assigned the correct IP in the communication card.
LED's indicators on Network status, Module status and Link 1 are green and blinking which means no connections are established.
Does someone have an idea what am I missing?