mhuntwork
Member
Hi everyone,
I am a startup, sitting in front of a new panel, and cannot get the Panelview Plus 1500 (2711P-RDT15C Series B FW 3.23) to work. I need to get the unit to communicate with my CompactLogix L32E controller but I can't seem to figure out how to install a module under Logix5000 that is the correct major rev 3, minor rev 23.
I have installed the apparently generic "ETHERNET/PANELVIEW Ethernet/IP Panelview" module under the ethernet port of the controller but the only option is major rev 1.
Of course, my module fault(Code 16#0114)Electronic Keying Mismatch: Electronic keying product code mismatch.
Can anyone shed some light on what I need to install, where to get it, etc.?
Sorry if this is an easy fix but none of the searches I have tried are helping.
Thanks,
Mike
I am a startup, sitting in front of a new panel, and cannot get the Panelview Plus 1500 (2711P-RDT15C Series B FW 3.23) to work. I need to get the unit to communicate with my CompactLogix L32E controller but I can't seem to figure out how to install a module under Logix5000 that is the correct major rev 3, minor rev 23.
I have installed the apparently generic "ETHERNET/PANELVIEW Ethernet/IP Panelview" module under the ethernet port of the controller but the only option is major rev 1.
Of course, my module fault(Code 16#0114)Electronic Keying Mismatch: Electronic keying product code mismatch.
Can anyone shed some light on what I need to install, where to get it, etc.?
Sorry if this is an easy fix but none of the searches I have tried are helping.
Thanks,
Mike