Communication using cc link

vishnuk444

Member
V
Join Date
Mar 2011
Location
Man
Posts
2
hi guys...
I'm trying to connect two Mitsubishi FX3G plcs via cclink...
how to check if my connection are okay???
is that the software check??? my hardware is working properly(according to manual)....

thnx for the help and replies

:geek:
 

Similar Topics

Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
117
yawin
Y
D
Changing OMRON PLC & HMI IP causing communication break
Hello everyone, I am trying to change the IP address of the Omron PLC (NJ30-1200) and HMI (NB7W-TW01B) to fetch the network on our network...
Replies
7
Views
289
Dshahzad
D
A
Communication between Matlab and Siemens PLC Using TCP
I am trying to establish communication between Siemens PLC 1500 and Matlab. I followed a tutorial on youtube at this link: But when I got to the...
Replies
0
Views
354
abiolatoks
A
M
SLC5/03: (problem) Serial Communication RS232 to RS232 using Laptop DB9
I have wasted a week trying to figure out how to connect an SLC5/03 with my laptop. I do not have and can not Buy the 1747 UIC and PC3 cables. I...
Replies
14
Views
2,557
dmroeder
dmroeder
I
Communication of Modbus Flowmeters using Micro850
Hello. I want to use micro850 to read and write registers from 120 modbus tcp devices. I want to know if anyone that implemented such a solution...
Replies
2
Views
483
5618
5618
Back
Top Bottom