JordanCClark
Lifetime Supporting Member
Hi Guys!
I have a 5069-L310ER that I've been using, FW v30.011, Dual IP mode. Using this to route to a 1769-L30ER.
Setting up the Dual IP was easy enough. Figuring the connection path through the 310ER to the 30ER took a bit of trial and error (mostly error), but got it to work.
Then I swapped the IP addresses on the 310ER. Went okay, and after adjusting the connection path, also connected to 30ER.
Now, when I tried to put the IP addresses back to my original settings, I get stuck in a loop. Handy video here:
https://youtu.be/kR5aW5uQa9k
It's doing some SD card activity and appears to pass, Then displays a Major Fault of Type 1, but never gets to the Code number. Just speculating, but I think it's writing an error log to the SD card.
Either way, I can't connect to it to clear or correct the issue. Can I recover it, or did I just brick it? Would setting up a known good system with a different SD card help?
I have a 5069-L310ER that I've been using, FW v30.011, Dual IP mode. Using this to route to a 1769-L30ER.
Setting up the Dual IP was easy enough. Figuring the connection path through the 310ER to the 30ER took a bit of trial and error (mostly error), but got it to work.
Then I swapped the IP addresses on the 310ER. Went okay, and after adjusting the connection path, also connected to 30ER.
Now, when I tried to put the IP addresses back to my original settings, I get stuck in a loop. Handy video here:
https://youtu.be/kR5aW5uQa9k
It's doing some SD card activity and appears to pass, Then displays a Major Fault of Type 1, but never gets to the Code number. Just speculating, but I think it's writing an error log to the SD card.
Either way, I can't connect to it to clear or correct the issue. Can I recover it, or did I just brick it? Would setting up a known good system with a different SD card help?