compactlogix 5555

ygnm

Member
Y
Join Date
Feb 2015
Location
vicksburg, ms
Posts
85
Hello all. i have a 5555 controller that is just reading some info from a plc5. i noticed that i had an error with the dh+ module so i started working on that and now the program in the 5555 is not running. it shows its in run mode and i can make changes but nothing will execute. anybody seen this before or have any advice to offer?
 
you are correct there. it dumped the program. i took the opportunity to replace the battery while i power cycled it which eliminated one issue. my issue now is it is set up to read data from a plc5 with a dhrio card and i am getting "illegal command from local processor" errors on all my messages. any input on that?
 

Similar Topics

T
Converting ControlLogix5555 to CompactLogix L35E
Okay guys. I converted our Wash program from a ControlLogix down to a CompactLogix. It worked out fine, however, I no longer have the 1756-M02AE...
Replies
6
Views
4,017
dash
dash
E
CompactLogix strange message block behaviour
Hi All, I'm just trying to understand the reason behind something I recently experienced. Background: The system contains 4 CompactLogix...
Replies
2
Views
106
elfrider
E
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
2
Replies
15
Views
268
geniusintraining
geniusintraining
H
CompactLogix PLC with FTalk View ME to Grafana
Hi everyone, i have a compact logic 1769-L18 PLC and I'm using FTalk View ME for the display. I wanted to do some visualization on Grafana. At...
Replies
2
Views
156
hafizzz_ahmad
H
S
Backplane Data Transfer Speed of CompactLogix 1769 Series?
Does anyone know what the data transfer rate for this series of CompactLogix PLC's? 1769-L24ER-QB1B to be exact. Cheers.
Replies
1
Views
119
robertmee
R
Back
Top Bottom