am having some issues with updating the firmware on a 1769-L35E,.
The flash process will start and all the blocks are transferred, but at the end the Poll for power up will time out. I then get a message saying 'Failed to begin update to the target device. The target device is not in the proper mode to accept an update.
I have the controller key switch in prog mode.
The red OK indicator then flashes red.
Is there anyway of recovering this?
Thank you
The flash process will start and all the blocks are transferred, but at the end the Poll for power up will time out. I then get a message saying 'Failed to begin update to the target device. The target device is not in the proper mode to accept an update.
I have the controller key switch in prog mode.
The red OK indicator then flashes red.
Is there anyway of recovering this?
Thank you