concept 2.6 timestamps

golarger

Member
G
Join Date
Jun 2004
Posts
7
Hi All,

Is it possible to alter the project date/timestamps for concept 2.6 projects?

I have a remote PLC that I need to connect to but the PLC and progammer have different expected times/dates. I am confident that the offline program and configs etc are the same but I can't get an equal status. The 'include IEC upload information' is unchecked causing upload not to function correctly.

I need to invert some I/O and don't really want to do a download over the analogue modem.

Any ideas would be welcome.

Cheers

Chris
 

Similar Topics

F
Schneider Concept 2.6 programming for momentum PLC
Trying to identify the Modbus RTU registers that are in use in the Function block programming in the PLC program. I have a Kohler DEC 550...
Replies
0
Views
155
Fets1
F
F
Weight Feeder Concept
I'm just starting to learn about industrial automation processes, I want to know how a weight feeder unit works which consists of a load cell and...
Replies
14
Views
1,073
padees
P
M
Upgrade 140cpu43412A from concept to unity
We plane to upgrade quantum modicon 140CPU43412A but for upgrade executed , the version must be above or equal v04. When inspect the cpu no v04...
Replies
0
Views
534
Mohammed zaid
M
C
Concept 2.2 converter
Hi Guys, i would need dbconv.exe from Concept 2.2 to convert my plc program to the new Concept 2.6. Unfortunately, I couldn´t find my Concept 2.2...
Replies
3
Views
1,492
koyeap
K
dternosky
Part Sprayer Concept Programming question/advice
Concept of the system (Sketch of system attached) **I am blessed to be a member of this community, thanks in advance** System is a chain...
Replies
8
Views
3,004
parky
P
Back
Top Bottom