configuration analog micrologix 1500

[jim-garcia]

Hello all

I have problems for setup the module 1769-OF4
using the analog output from 0v to 10v
it is not listed under the analog modules
but I can upload the configuration and can see under
the outputs the analog Ouput channels and
under the inputs the analog input channels
I set the output a value with not success
my module is in the slot 3

Does any have an Idea
Do I have to put extra data ?
I'm Really Lost !!!!!!

 

[Mickey]

See link below, appendix B page 55.

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1769-um020_-en-p.pdf

 

[jim-garcia]

Configuration error

See link below, appendix B page 55.

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1769-um020_-en-p.pdf

Hi thank you for your comments but still not clear for me
Do you have a sample program where all the analog outputs
are 0-10v I been play with the module and there is other error
message that the current is not set for module


One more time Thank you for your time

 

[sthompson]

Have you configured the Channels as described in Chapter 3 of the Manual?

Stu....