ariel
Member
Hi Everyone,
I just want to get some help with regards to the step by step procedure in downloading a program into an Allen Bradley PLC-5/80C15, Just an overview of our system, we use two CPU PLC Sets with Redundant links which communicates to remote I/O modules through ControlNet, beside the CPU Module is a ethernet module also connected inside the PLC Rack which is connected to a network switch and some of our Field Equipmenmt are also connected to this network switch using BACNet,Modbus and other protocols based on the manual and communicating to each other, I,m a new user of this PLC and i,m trying to study the set-up because i will be dealing with it in the future. Any help you provide is a big help and a big step for my better understanding of this stuff.
I just want to get some help with regards to the step by step procedure in downloading a program into an Allen Bradley PLC-5/80C15, Just an overview of our system, we use two CPU PLC Sets with Redundant links which communicates to remote I/O modules through ControlNet, beside the CPU Module is a ethernet module also connected inside the PLC Rack which is connected to a network switch and some of our Field Equipmenmt are also connected to this network switch using BACNet,Modbus and other protocols based on the manual and communicating to each other, I,m a new user of this PLC and i,m trying to study the set-up because i will be dealing with it in the future. Any help you provide is a big help and a big step for my better understanding of this stuff.