Connect and upload S7-200 CN program to my PC

[jonney]

START FROM ZERO. I had a sharpening machine using S7-200 CN. I don't have PG or software or communication cables. What is the software/cable to connect and upload the program inside? Please show me step by step.

 

[parky]

You need an adapter cable 6ES7 901-3CB30-0XA0: or I bet there are some cheaper versions, the above is 232 to 485 however, there is probably a USB version. Step7 Microwin software V4 SP8 here is a link
https://support.industry.siemens.co...ad,menu under the item Simatic More items...

 

[geniusintraining]

You need an adapter cable 6ES7 901-3CB30-0XA0: or I bet there are some cheaper versions, the above is 232 to 485 however, there is probably a USB version. Step7 Microwin software V4 SP8 here is a link
https://support.industry.siemens.co...ad,menu under the item Simatic More items...

I would get the 3DB30 https://www.plccable.com/siemens-usb-ppi-multi-master-187-5k-6es7-901-3db30-0xa0/

Please show me step by step.

See below

http://www.youtube.com/watch?v=Ud6CfBzye8E

On a side note... not all S7 200's are the same, the CN version you have is made in China and some will not work with the software that Parky linked, they would only work with the Chinese version of MicroWin

 

[jonney]

Thank you all.
I will try to connect and get the program in few days.