Connect severals S7-300 to WinCC with port MPI
- Thread starter jm76
- Start date
Similar Topics
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Here's what happened,
Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
What has been your experience with year over year price increases on your Tech-connect service contracts? Is it up to the distributor?
30% seems...