Connect

mahamadreza

Member
M
Join Date
Jul 2006
Location
tabriz
Posts
17
dear freinds,
we have some gas chromatograph analyzers from rosemount.their hmi is GCX. as they are located near each other, they are connected to each other through RS422,and for calibration we
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
321
JesperMP
JesperMP
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
106
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
123
Para
P
T
HMI shows motor running even though disconnect is on.
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
352
TheColt46
T
J
Rockwell Techconnect service contract price increase?
What has been your experience with year over year price increases on your Tech-connect service contracts? Is it up to the distributor? 30% seems...
Replies
5
Views
292
bill4807
B
Back
Top Bottom