courtneyj12345
Member
Ive been asked to connect a small PLC monitoring system for a fish farm to control 2 inverter for air blowers. The alarm systems have been set up to activated outputs on the PLC and then in turn, activate the inverter drives. I have very little experience with connection PLC systems and would like some advice on how to connect
I have 6 positions for each relay output which are as follows
N/O
24v
C
I/O 1
N/C
0v
I have to connect in up to an ABB ACS150 Inverter drive.
Any help would be appreciated
I have 6 positions for each relay output which are as follows
N/O
24v
C
I/O 1
N/C
0v
I have to connect in up to an ABB ACS150 Inverter drive.
Any help would be appreciated