tck
Member
As the title indicates I am trying to connect a PLC5/40C to Honeywell Experion R301 using 1785-ENET card. I am not really familiar with PLCs at all, but I understand the basic concept of their logic and purpose.
The problem lies (at least I think it does) in the connection between RSLinx and the PLC5. In RSWho I can see the Ethernet card but it has no children, such as the backplane or even a controller. I am told that the Ethernet card and the controller are seen as one device but I am not sure that I believe this.
Has anyone ever attempted this before? If so what was the end solution?
Thanks in advance
tck
The problem lies (at least I think it does) in the connection between RSLinx and the PLC5. In RSWho I can see the Ethernet card but it has no children, such as the backplane or even a controller. I am told that the Ethernet card and the controller are seen as one device but I am not sure that I believe this.
Has anyone ever attempted this before? If so what was the end solution?
Thanks in advance
tck