Control Speed of VFD using 0-10vdc analog

surveypay

Member
S
Join Date
Apr 2011
Location
FLORIDA
Posts
7
I have an analog input device, a Bradley control logix PLC, A Bradley VFD, Logix 5000 software. How is the best way to program the PLC to vary the speed of the VFD in response to the analog input device using 0-10 volt analog.
 

Similar Topics

D
Device Net VFD Speed Control
Hello, So I was asked to turn up the speed on a VFD to allow a carriage to move a little bit faster and avoid getting stuck. Im not sure the exact...
Replies
2
Views
737
alan_505
A
B
How vfd detect speed in open loop control
I don't understand how vfd detects speed when we are running in open loop control (sensorless). For me only possible way; during auto tuning it...
Replies
4
Views
2,658
jraef
J
T
How to control VFD speed (Powerflex525) over ethernet in Studio5000
I am wanting to control the speed of the VFD within the program. I am not sure if I'm not seeing the tag that controls frequency or what. Thanks...
Replies
4
Views
2,059
tgonz11
T
P
Wide-range speed control (VFD, etc.)
I need some help trying to pick a motor and controller (possibly VFD) for a winder application. It is going to use a foot-pedal input to control...
Replies
10
Views
3,333
shooter
S
A
Beckhoff ST Control VFD Speed with fb_ctrl_pi
Need some help here, I am new to ST and BECKHOFF. Part of my application is a Recoiler that not only rolls up the material this machine is...
Replies
0
Views
1,321
[email protected]
A
Back
Top Bottom