Controller Link

[Aníbal Paul Aponte R]

I have a controller link support board for ISA PC bus (3G8F5-CLK01 V1.00).
The support board installation is Ok and the setting too. The RUN indicator of the board lit.
I'm using the FinsGateway V3.0 software.
The CPU_UNIT service work fine, but when I start the CLK_UNIT service the ERH indicator lit and the communication are impossible.
Which is the probable problem?
I accept any help about this situation!

Sincerily yours,
Ing. Aníbal Aponte

 

[Jay Anthony]

ERH indicates either bad(0) or duplicate number or routing table error.

 

[accotech]

where can I download the Fins Gateway V2 for 3G8f5-clk01 ?

 

[BobB]

It is supplied when you buy CX-Programmer.